Leysop 6mm Fast Risetime
UPC Pockels Cell

                      A step function driver has been built for this Pockels cell. Two Pockels cells and two drivers of this type
                      can be used for slicing pulses with a very fast risetime of 250psec. Repetition rate is 100Hz.

                      This oscilloscope trace below shows the measurement of the optical transmission in a single-pass setup
                      measured with a photodetector of risetime 40psec, the oscilloscope risetime was 160psec
                      Parameters: 1064nm, 7.2kV


                      The oscilloscope trace below shows the same measurement with a resolution of 100psec
                      Parameters: 1064nm, 7,2kV



hrs026.GIF (1088 bytes)

||  home  ||  products  ||  contact  ||

hr026.gif (1151 bytes)